On this page you will find the Frosts Traditional Craftsman Mora Knife, the Clipper soft grip knife in Flame Orange and Blue, and the Classic Mora Knife S-1 survival knife with red wood handle.

Model 860, 860F, 760 and S-1 Classic Mora Knife

Frosts Craftsmen's "Mora Knife" Model 760.

This is Frosts most popular multi-purpose knife.  Craftsmen's 760 blade is 4 1/4 " stainless steel.  Blade is 105mm (4 1/4") entire knife measures 220mm. Blade is made of hardenable stainless steel (hardened to HRC 57), for extreme strength, long life and high resistance to moisture without rusting.  High quality Swedish Sandvik 12 C 27 stainless steel has a trace of Silicon in the alloy to achieve  the unsurpassed combination of blade strength and ductility Frosts is famous for.  Handle is rugged polypropylene plastic.  Comes with a black plastic protective sheath.

Only $13.90 each 760 Craftsman Stainless Steel

Quantity:

Featured in "Field & Stream" Summer 2004

You can order this knife with your companies LOGO on it!! Check out our Logo Knives Page !
The Clipper - High Friction Soft Grip Sheath Knife - Model 860 stainless steel

 
860 and 860F Clipper Series Knifes

A new generation of knives from Frosts has handles covered with a layer of thermoplastic rubber for superior grip as well as a new modern shape.  This all purpose knife (Blue knife is Model #860) comes with a black sheath, and the hunter flame orange trimmed safety knife (Model #860F) comes with a flame orange sheath.  The plastic sheaths have both belt and button clip and a bottom drain hole.

Models #860 & #860F have our traditional high quality 4" Sandvik stainless steel blade (HRC 57) which give these knives extreme strength, long life and high resistance to moisture.  Blade length 4" (100mm). Includes Sheath.

$15.20 each Blue 860 Clipper
Quantity:
$16.40 for Orange Safety 860F Clipper
Quantity:

Classic Mora Knife with red wooden handle and 4" laminated steel blade -   Model S1

Featured in "Blade" Magazine, Aug 2002.

The Frosts Traditional "Mora Series" Knife is a classic - recognized the world over for its strength, durability and craftsmanship.  This is a very popular survival and outdoor knife.  The S1 is has a 4 inch (99 mm) blade length and 8 inch (200 mm) overall length.   The laminated steel blade is a Frosts exclusive.  It is unique in that the core of the blade is made from high carbon steel surrounded by a softer alloyed steel layer.  It is then hardened to a tough HRC 61. The result is a knife blade with superior toughness, cutting edge retention, maximum sharpness and long life.  

When comparing knives,  please note this knife is THE laminated steel genuine "Mora Knife" -  not a cheaper carbon steel blade. Our exclusive laminated steel blade is much harder (yet flexible and break-resistant) and more rust and corrosion resistant than a blade fashioned out of simple carbon.

Only $18.00 each:  S1 Mora Laminated Steel Knife with Sheath    

Quantity:
Craftsmen 740 Mora Knife with CARBON blade and red polypropylene plastic handle.  Craftsmen's 740 blade is 4 1/4 " Carbon steel.  Blade is 105mm (4 1/4") entire knife measures 220mm. Knife blades of high carbon steel can be hardened to HRC 59-60 balancing the best price with best possible sharpness. Knives made from above carbon will after some time achieve a dull gray finish. This will not negatively effect the quality of the blade. On the contrary it will somewhat improve the resistance to corrosion. Blades are oiled to prevent rusting during transport and storage.

$11.90 each: Craftmen 740 Mora Knife carbon blade

Quantity:

 

   
Woodcarvers Kit Hunting Knives Logo Knives